Recommended Dose Rates

Recommended dose rates for GeoSIL can only been looked upon as a guide, or as a good starting point for individual on-site testing. In most applications there will be a number of variable factors that will influence the final rate required to achieve disinfection, but common sense & good trade practice will always be the most important considerations.

Effective dosing will also depend upon available exposure time. This means that long exposure times will permit lower dose rates, while short exposure time will require a higher dose rate.
In most cases, modest overdosing will be unlikely to cause problems, whereas under dosing may not achieve the required level of sanitation.
Contact GeoSIL Pacific for further details.

Pour N Go Dosing Chart

Pour N' Go should be applied at the rates indicated on the bottle, or as indicated in the chart below. If in doubt about the extent of contamination in the water tank, application should tend towards the shock dose rates.

Selecting the Dose Rate